How to Clean Bandsaw Tires

          金博宝手机app雜工的世界是一個參與者in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.
         

Excessive buildup of sawdust and pitch on yourbandsaw tires一段時間勢必發生一次。因為帶鋸要求刀片騎在輪胎的確切中心，以獲得最佳張力，所以保持幹淨的是一個好主意，所以它可以精確定位。

Cleaning your bandsaw tire is a simple process, as long as you keep a few things in mind and take the necessary precautions.

How Often Should You Clean Your Bandsaw Tires?

The frequency with which you need to clean your bandsaw tires depends on how much and how often you use it. If you cut green, or unseasoned wood, expect the bandsaw to need cleaning more often. You can think of it as regular maintenance to keep the saw in perfect running condition.

Everytime you use your bandsaw on wood, fine particles and bits of sawdust accumulate on the bandsaw tire, especially on the lower tire, where sawdust tends to get trapped under the blade as it travels around the wheel. You might only need to clean your bandsaw occasionally if you are a light user, and if the bandsaw is operating fine. On the other hand, you may need to clean it more frequently if you regularly cut resinous wood that leaves pitch residues, pine tar, and sawdust on your bandsaw tires.

There are two methods to clean the bandsaw tires. One method uses a cleaner, and one doesn’t. If your bandsaw’s tires are mostly covered in fine sawdust or dry powdery wood particles, you can try cleaning without any chemical cleaner.

沒有肥皂或清潔劑

You shouldn’t need cleaners or soap unless you’ve been cutting resinous wood like pine. Before you begin cleaning, gather the following items: a piece of cotton cloth, 120-grit sandpaper, an old stiff toothbrush. Then, follow the process below:

Step 1: Unplug the bandsaw– Safety first! Always start by unplugging your bandsaw before doing any routine maintenance.
Step 2: Remove the saw blade– Next, remove the saw blade in order to work safely on the saw and tilt the table to access the tires better.
Step 3: Clean the lower bandsaw tire- 通常，下帶鋸輪胎將通過首先清洗它來累積更多的灰塵。
Step 4: Scrape the bandsaw wheel– Using some fine sandpaper (120-grit would be fine), scrape the band saw wheel, while turning the wheel by hand. This will help remove most of the stubborn saw dust. Continue gently rubbing the tire all round. Using an old toothbrush, rub the wheel until all visible debris is removed.
Step 5: Wipe the tire with a cotton cloth– Finally, use a cotton cloth to wipe the bandsaw wheel.

Using Soap or Cleaner

某些硬木不會在你的鋸上留下樹脂殘留物，但是鬆樹和綠色的樹林。如果您的帶鋸具有特別頑固的殘留堆積，您可能需要用更清潔或肥皂洗滌劑清潔它。確保您使用的任何清潔器都是安全的橡膠。

For this method, you’ll need the same things as for the process above plus some 2050 blade cleaner or any other suitable water-based cleaner. Similarly, first follow steps 1 to 3 of the process above before continuing with the next steps:

Step 1: Apply the cleaner on the bandsaw wheel– Apply the cleaner of your choice on the bandsaw wheel using the old toothbrush, then leave it for 15 minutes. This will allow the cleaner to loosen up the sawdust, grime, and debris.
Step 5: Rub the tire with the brush- 現在用刷子擦拭輪胎以去除樹脂和任何剩餘的碎片。溫柔，使橡膠沒有刮傷或損壞。
Step 6: Dry the bandsaw tire before use– Once the tire is clean, dry the tire well with a cotton cloth or by letting it dry in the sunlight. Ensuring that the tire is fully dry will help prevent slippage or corrosion of the rubber tire.

Mistakes to Avoid, Tips & Tricks

Never use any cleaner or liquid for cleaning the tires that may be corrosive or harmful to the rubber or urethane tires. Some suggestions for cleaning liquids include WD-40, Simple Green, and Goo Gone. Avoid using oven cleaners, solutions containing alcohol, or anything that leaves an oily residue on the tires.

另一個尖端是在試圖清潔輪胎之前讓帶鋸幹燥過夜。幹燥的鋸末和堆積更容易拆除，因為它比濕濕更容易擦掉。

Some people recommend using a cabinet scraper for cleaning the gunk. You hold the cabinet scraper in one hand and spin the wheel with the other, gently rubbing the scraper against the tire. It’s best to avoid using rough sandpaper, iron wool, or other objects to scrape the gunk off the tires as they may damage the rubber.

You can also lubricate your bandsaw mechanism once the tire has been cleaned.

概括

隻有在需要時，您應該僅在帶鋸上清潔橡膠輪胎，例如當車輪上有鋸末或螺距堆積時。為防止座椅在鋸中創建不準確性，請遵循上述建議的清潔方法。如果累積大多是鋸末和幹燥的木顆粒或使用清潔劑去除焦油瀝青，樹脂或粘性殘留物，則可以選擇清潔任何化學物質。

Once it’s cleaned, your bandsaw will be all set for your next crafting project.